News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

This could be cool? Repo bits for our cars!!

Started by 4hammers, April 06, 2005, 02:24:54 AM

Previous topic - Next topic

4hammers

Hi Guys.
This may be in the wrong section, but I wanted everyone to see it. I was checking out a 58 Chevy not long back & noted how the door handles & winders looked exactly the same as our FE FC FB EK examples. So, I had a look on some sites to see if they do USA repos (Which seem to be very good quality most of the time). I found this dealer & he sells them in sets. They look great. This guys says he only ships to the USA, but I will email him & see what he can do.
Here is a link to one of his auctions for the handle winder sets;

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&tc=photo&item=4539780437&category=34206

Regards,
Rob J
WTB..FE FC Commercial...Stock plz

zulu

The FE armrests are the same on some earlier model Chevs also.
Gary

graham_fuller

#2
Hey Rob,
Checkout this site http://www.danchuk.com/.
They have an agent in Vic just can't recall their name.
cheers,
Graham

Jodstar

I have a friend who has two holden built chevs, a 53 & 59. They both use components that the holdens have and even the same sunvisors.
                                                   Jodstar. ;)

4hammers

Hi Guys.
Well, I contacted him & he is happy to ship to Australia. $27.00 US via Air-Mail.
This brings the total to about $95 US = $123.00 AUD

Not bad!! That equals about $15 a piece (That includes the remover) & you have a couple of little ones left to do as you please!?
He assures me they are top quality & has offered to send one over so I can check it out.
I for one will be getting a set. I will let you know when they arrive how good they are.

Regards,
Rob J
WTB..FE FC Commercial...Stock plz

fcstationsedan

Ron Wicks at Classic Chev Parts in Brunswick is the Australian dealer for Danchuk and other repro Chev stuff. Much of it is similar to FE-FC. He can be contacted at (03)93811955. I deal with him regularly.
Dave
Former 1959 FC Station Sedan owner.

graham_fuller

Thanks Dave I just couldn't remember.
Cheers,
Graham

2brite

Also my mate has a 57 Vette and the handbrake handle,seat knob adjuster,door handles and light switch ,wiper  and choke knob are FE/FC