News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Width of grille

Started by Ed, March 30, 2005, 11:40:55 PM

Previous topic - Next topic

Ed

Hello,

Could anybdoy enlighten me on the inner width of the chrome grille surround?

mine is 1 hours drive away and wont be able to get this info until the weekend.

so if somebody could measure both it's inner height and width be much appreciated.


Cheers

Ed

in the shed

Glenn 'Stinky' Stankevicius

#1
Do you maximum measurements or measurements at certain points?

Ed

Hi Stinky,

the inner edges of the grille surround,

centre of inner side to opposing centre of inner side to give the width.

and centre of the horizontal section to opposing side to give the height.


Cheers

Ed

in the shed

Glenn 'Stinky' Stankevicius

#3
At the centre the vertical measurement is 202mm on my reco'd grille (chromed, powder coat and in the car)
The grille in the boot of a wreck was 7mm less and the grille on the wreck was 5mm less.

Horizontal measurement at what I thought was the widest point, 965mm, but this is with the horizontal bars in place so it is a curved measurement.

HTH

Ed

helps a heap Stinky!

Thanks alot.

Cheers

Ed
in the shed