News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

clutch options

Started by Dave_EH, January 21, 2005, 10:00:16 AM

Previous topic - Next topic

Dave_EH

I have a clutch of unknown condition currently backed to a 3 speed crash box and what will be a fairly warm 179 when completed.

I am considering an upgrade while the gear box is out and wondered whether I should get a 1 ton clutch or even a tripple plate?

What would be the best option for a daily driver and are there any hidden technical probs with a clutch upgarde?

regards
Dave

fcphun

Dave

If it is the same crash box as original the tougher clutch will mean you will probably put more stress on the tranny and as a result you will be looking for an upgrade pretty soon. I run a 202 with the original crash box but I am very gentle in first gear (also 2.78 diff). Be careful what you intend doing to the beast as you may find the gearbox will be the weakest link.

Paul

TorqueFC

hey off the subject slightly but 202 with crash box, we have it in 1 of our cars but will it pass for reg
tests have proven that the final words before a fatal urban car crash are "OH ****"

in a rural car crash they are " Hold my stubby and watch this for skill!"

Glenn 'Stinky' Stankevicius

Years ago when I burnt out the clutch on an Aussie 4 speed the mechanic recommended a 1 tonne pressure plate on the the Std clutch. Worked a treat! Never had any trouble with that one behind a mild 173, but we are talkin' teenage driving style too  ;D

TorqueFC

hey i would drive like old pplz(u 4 example), i have only eva tharashed a car and that waz on a paddock

so will it pass for reg

sori if u take my oppinion opersonaly, i mean no harm :D
tests have proven that the final words before a fatal urban car crash are "OH ****"

in a rural car crash they are " Hold my stubby and watch this for skill!"

nicko

one ton clutch is fine as it has good clamping pressure but the old crash box is a bit week, mind you they hold up ok if you dont thrash it.and are no problem for rego as they are standard with no mods needed,

Dave_EH

Thanks Nicko and paul,

Sounds like the 1 tonner may be the go.

I know the gear box is the weakest link at the moment... but i really like the look of the column shift and bench seat.

I'm hoping the tall diff and and taking it a little easy in 1st gear will help it last a little while at least.

Still... I've destroyed 3 gear boxes in my little Sunny I drive to uni and its got about as much horsepower as lawnmower...

Regards
Dave

Spinner

Dave,

At the last Ford vs Holden ShowatHomebush,I spoketoa bloke who owns a green EH Ute that was on show. THe car had a worked red, supercharged or something.  He had a column shifted crash box, which he said had lasted him quite a while of rough treatment.  According to him, the secret to making a crash box survive is to have the gears hardened.
(0414) 49-6706.  d5461 on Ebay.

earlyholdenfan

Probable a little ot but Roger Handcock from the FB EK car club in Victoria makes a conversion kit that will allow you to use the later Synchro box with the column mounted gera shift, so if the loook is what you are after talk to the club and get Rogers Kit
Matt

Dave_EH

Appreciate the help, thanks for all your input!

Regards
Dave