News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Heater question.

Started by customFC, November 01, 2004, 11:14:36 AM

Previous topic - Next topic

customFC

Anyone know anything about this heater?
Flow through heater with no fan. How good do they work. Looks like space for demister vents on the top. Is there any connections missing?


Guy says it came out of an EH, so should be good for red motor.
Regards
Alex

Jodstar

Hi Alex,I have the same heater. Mine was mounted under the dash with the two holes in the top for demister.Mine has a hole @4inch that a flexable hose connected to . It then went thru the firewall on the passenger side, out & around the carb to a mounting bracket using one of the thermostat bolts.It uses the engine fan to blow the air into the tube thus into the heater inside! As for the water, it was just two hoses with a cable operated tap for temp control,much the same as other heaters.
                                           Cheers Jody.(Jodstar)