News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

weber carb

Started by andykotzur, October 25, 2004, 08:32:14 AM

Previous topic - Next topic

andykotzur

Has anyone got any info on adding a weber 2bbl carby to a 186?
Do you have to jet it down?  Whats the fuel economy  like?  Power?
I`ve got the manifold , adapter plate , and carby.  I think I`ll wack it on and give it a go. ;D
andy

Dave_EH

If it is the webber used on the XF Falcon it must be rejetted to use on the holden red.  I believe this thread has been explained in moderate detail before - try searching under "triples". I fairly sure this set up has been advised to me as an alternative to a holley or triples by another member

Regards
Dave

Dave_EH

sorry... i forgot to add that the weber apparently gives good power and good economy by have a smaller primary jet than a similar holley, and under normal driving the secondary jet will not open up too often

a holley 320 economaster is also quite effective on a 186

Dave