Brake booster "type"

[Digger]

Hi Guy's,

Im looking for some advice on fitting a brake power booster to the fire wall, I'm currently running LH disks and callipers with a 1"tandem master cylinder boosted by a VH40 and would like to change it.
What I would like to know is what booster I can use and is there one that will fit and have enough room to mount the clutch master cylinder as well.
Any advice will be appreciated.

Thank's
Steve.

[ACE]

 ;)HI DIGGER
   I USED A BOOSTER AND TANDEM MASTER FROM A HK HOLDEN.
   IT FITTED LIKE IT WAS MADE FOR THE FC AND NO PROBLEM WITH THE CLUTCH MASTER CYLINDER EITHER.
   HOPE THIS HELPS
   REGARDS ACE  8)

[Digger]

Thanks a heap ACE, ;D

Ace could you tell me if the booster is mounted with 2 or 4 bolts, I was hopeing that the booster might bolt up to the holes I drilled to fit the master cylinder.  ???

Regards,
Steve.

[Ed]

Digger,

the booster has two bolts vertically oppposed and a third smaller one just off to the clutch master side.  I welded up the holes on the HK booster and redrilled them to suit the original FC brake master mounts.  The third bolt I drilled a hole for it and welded a nut on the back of the metal plate.

I also made a strengthening arm located up the front of the booster to stop any potential movement whilst driving.

Ed

[Digger]

ED and ACE,

Thanks a lot for passing on the information it will help me heaps. ;D

Guess what I will be doing this Saturday and Sunday.

Regards,
Steve