News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Headlight Rim Removal

Started by veteranrob74, May 23, 2020, 04:42:47 PM

Previous topic - Next topic

veteranrob74

Hi, can anyone please provide assistance to remove my headlight rim from my FE so I can change the bulb. Sorry, first time doing this.

ardiesse

To remove the headlight surround: two self-tapping screws, one on the underside of the surround, one under the top of the surround.

If your headlights are Lucas, grab onto the outside of the headlamp and give it a counterclockwise twist to release it from the bucket.  If the headlamp hasn't been removed for a while, it'll be very stiff.  Give the headlight a gentle push inwards against spring pressure at the top, the left and the right, and try to release it.  WD-40 on the heads of the adjusting screws will help.  (The headlamp rim works like a bayonet fitting on the adjusting screws.)

When the headlamp's released, unplug the wiring from the back of the reflector: push the plug in gently and rotate counterclockwise, like you would with a light bulb.

Now you can remove and replace the bulb. Hold the reflector glass side down.  If you hold it glass up, the bulb will fall out and break, as I just discovered.

If your headlights are Bosch, tell me and I'll transcribe the instructions in the shop manual.

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.