News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Never say never! (2) (Off-White FE/FC roof lining material)

Started by Glenn 'Stinky' Stankevicius, March 05, 2017, 04:03:24 PM

Previous topic - Next topic

grey nomad

Thanks for that contact I will give them a try :D   AL

Glenn 'Stinky' Stankevicius

So the promised December shipping date didn't happen, I contacted them last week and they will give me an update soon  ::)

graham_fuller

Thanks for the update and for continually chasing these guys Glenn.

Cheers and Happy New Year,
Graham

Glenn 'Stinky' Stankevicius

After SMS telling me they would check my shipping date all the back in early January, they got back to me yesterday promising a February ship date and they will update me with the actual day (year?  :P) that this will occur.

black57

Thanks for the update. I'm still keen if there is any left over.

Pinky.
A car on the road is worth 2 in the shed...
FE Standard rat rod
1965 GSM Dart - ex race car
1948 Singer 9
1954 Sunbeam Talbot drophead coupe
2 1960s custom fiberglass race cars

Glenn 'Stinky' Stankevicius

Good News/Bad News!

Good - the order is ready to be shipped!

Bad - they want an extra $372 for shipping. I will sort this payment out and get the order on the way, I'll then recalculate orders and advice people.

As to left overs, I expect to have 6 metres of off white and there is 3 metres of light green that was ordered but is no longer required.

GMHwagoon


Glenn
          how much of the off white would be needed for a panel van
          have a mate doing an original pmg postal van
          so thinking its the same as ute maybe ,you might have a better idea on the vans on the amount
          also he is checking the color of his original color he thinks its white

         
                   thanks greg      (fcwagoon)

Glenn 'Stinky' Stankevicius

1.5 metres for a Panel Van includes enough for visors.

GMHwagoon


black57

A car on the road is worth 2 in the shed...
FE Standard rat rod
1965 GSM Dart - ex race car
1948 Singer 9
1954 Sunbeam Talbot drophead coupe
2 1960s custom fiberglass race cars

GMHwagoon


glenn did you get my email

   thanks greg   fcwagoon

Glenn 'Stinky' Stankevicius


black57

Hi Glenn,

Any news on the leftovers?

BTW, how many meters are needed to do a sedan, how wide is the material and what's the cost end up being ?

Thanks.

Pinky
A car on the road is worth 2 in the shed...
FE Standard rat rod
1965 GSM Dart - ex race car
1948 Singer 9
1954 Sunbeam Talbot drophead coupe
2 1960s custom fiberglass race cars

Glenn 'Stinky' Stankevicius

There won't any word for a few weeks, I have 20+ orders to fill as well as my existing trim jobs and I only do the trimming 2-2 1/2 days a week.
Final cost per metre is $82:50 plus freight.
A sedan will need 3 metres to do the lining and visors.

Rip

Hi Glen
Wondering if you still have 3 metres of the swirly green patern, if so could you give me a quote to make up for fc sedan
thanks Rob.

HAD 708

Hi Glen
I have Pm you a message did you get it ??
Thanks
Brett
Brett Gillard

Glenn 'Stinky' Stankevicius

Quote from: HAD 708 on March 18, 2019, 04:51:57 PM
Hi Glen
I have Pm you a message did you get it ??
Thanks
Brett

Just did, for some reason I don't see notifications of PMs any more, best to email me.