Nominations for improved cooling head gasket - 2nd round

[Harv]

I'm OK for now - no need to send money yet.

I'll wait to end-October, then finalise the order. It will probably be November(ish) before I will need to see peoples cash.

Cheers,
Harv

[my8thholden]

Harv ..I am happy to pay you for head gaskets via D/D when you are ready to provide bank details and also what reference you want me to use ,so you know who has paid what ,where ,when etc ..
Vern..

[Greg M]

Hi, I would like a head gasket as well please as I am just in the process of of striping down my fc motor for a rebuild. What is the time frame for them as I would like to have it up and running by Christmas and also what else is involved in it obviously you don't just wack on a gasket and that's it, do you have to enlarge the water jacket holes? .Cheers Greg M.

[Harv]

Yes, you need to drill (or die grind) out holes in the head. The gaskets come with a copy of the original NASCO instructions.

This run of gaskets might be ready by Christmas, but more likely early new year.

If you need the motor before Christmas, shoot me a PM and I'll find you one of the earlier batch.

Cheers,
Harv

[Greg M]

Thanks Harv for that pm sent. Cheers Greg M

[Fraze]

Hi Harv, further to my reply of July 26, I can now confirm that I want 9 improved head gaskets. hope that's ok. Cheers, Fraze

[Naith05]

Hi Harv,
Put me down for 3 gaskets thanks.
Cheers Nathan

[Harv]

Ladies and Gents,

A gentle reminder that I would like your nominations for these gaskets by the end of October please. Nominations I have to date (please let me know if I have missed anyone):

FX/FJ forum:
Smog   (2 gaskets)
Calamine Blue (4 gaskets)

FB/EK forum
Blacky (9 gaskets)
59 wagon (2 gaskets)

FE/FC forum:
Wookie 66 (1 gasket)
RET (2 gaskets)
Fraze (9 gaskets)
JohnBM (6 gaskets)
Gp (6 gaskets)
Rusty_T (3 gaskets)
Chucati (2 gaskets)
Fatboy1932 (2 gaskets)
Graham_fuller (2 gaskets)
Pbh0069 (2 gaskets)
Fe_ute (2 gaskets)
RM-special (2 gaskets)
My8thholden (2 gaskets)
Pt58 (2 gaskets)
Naith05 (3 gaskets)

Ozrodders forum
3240 (2 gaskets)
Greg N Smith (1 gasket)

Total: 66 gaskets

In early November, I’ll send out a reminder. You get the month of November to pony up the funds to me. Last time round I only had two guys who didn't bother paying. I'll place the order, and AA Gaskets will let us know the timing. When the gaskets arrive, I'll parcel them up in plywood (like last time) and send them to you. Note that it is cheaper if you combine postage with a few mates, or as a Club.

Cheers,
Harv

[fcee]

Harv ,please put me on the list for one gasket if It is not too late .  cheers Steve . ;)

[Harv]

No problem.

I have nearly 90 orders, and have sent an email to AA Gaskets to firm up pricing and timing. I'll round the order out to 100. Will let you all know once I hear back from them.

Cheers,
Harv

[JohnBM]

Just to re confirm to members who haven’t as yet realised the benefits of the modified head gasket , I have had our FE since 1978 & it has always been a problem re overheating ,three trips over the nullabor to e/a nats did it for me . We had A problem with crank end float so I thought I’ll kill two birds with the one stone . & had the new gasket fitted when Harv organised the first run , what a difference , as I said prev I have two temp sensors , head & top rad tank , the two readings are now on avg 2 deg difference . Today in Perth wa , it was 32 deg ambient temp : the old girl sat on 72/ 73 c on a long run , never achieved before . More than happy , even the engine co .have asked for a few of the gaskets ,happy days 🍺🐌

[black57]

Please put me down for 2.
Any idea how far off these are, as I am half way through building my grey. Will be back together in about 3 weeks.

Pinky.

[my8thholden]

OK Thanks Harv ..will wait till your next advice ..

[Harv]

Ladies and gents,

I now have orders for 84 gaskets, and am ready to place an order with AA gaskets.

FX/FJ forum:
Smog   (2 gaskets)
Calamine Blue (4 gaskets)
Gunner Happen (2 gaskets)

FB/EK forum
Blacky (11 gaskets + 2 for 59 wagon)
VMX-MXR (5 gaskets)
Craig Allardyce (4 gaskets)
Graypower (3 gaskets)

FE/FC forum:
Fcee (1 gasket)
Wookie 66 (1 gasket)
RET (2 gaskets)
Fraze (9 gaskets)
JohnBM (6 gaskets)
Gp (6 gaskets)
Rusty_T (3 gaskets)
Chucati (2 gaskets)
Fatboy1932 (2 gaskets)
Graham_fuller (2 gaskets)
Pbh0069 (2 gaskets)
Fe_ute (2 gaskets)
RM-special (2 gaskets)
My8thholden (2 gaskets)
Pt58 (2 gaskets)
Naith05 (3 gaskets)
Black57 (2 gaskets)

Ozrodders forum
3240 (2 gaskets)
Greg N Smith (1 gasket)

Total: 84 gaskets


Delivery from AA to me will be just before Christmas. If I get time, they may go into the post pre-Christmas. It is more likely they will go into the post end-January.

Costing as follows:
Gasket cost: $41.00 each.
Plywood and tape packaging: $4.00 (same price for one gasket, or many gaskets)
Postage: $20.00 (flat rate Australia wide to make this process simple)
Total: $65.00
So if you want one gasket, you owe me $65. If you want two gaskets, you owe me $106. Three gaskets $147.00, four gaskets $188.00 etc. Slightly cheaper than last time, as we have recouped the tooling costs. Happy for people to bundle their gaskets with other people to save postage. Equally happy for you to pick them up from Greystanes, western Sydney if that suits. Just like last time, I will not make a red cent out of this exercise, nor charge for my time.

Just like last time, these gaskets come with an instruction sheet (copy of the NASCO guidance), and a warning sheet (to prevent people putting them on upside down). The gaskets come with no warranty from me, and no warranty from AA Gaskets.

Over the weekend I will send out PMs to each of you, seeking payment by 7th December. Payment will be by PayPal please (it is readily traceable, and it sends me an email warning once you have paid). For those who do not have access to PayPal, give me a yell and we will sort something out.

Cheers,
Harv (deputy apprentice gasket scraper)

[Harv]

Please note I made a slight mistake in the price above )forgot to add GST on the gaskets). Price will be:

Gasket cost: $45.00 each.
Plywood and tape packaging: $4.00 (same price for one gasket, or many gaskets)
Postage: $20.00 (flat rate Australia wide to make this process simple)
Total: $69.00
So if you want one gasket, you owe me $69. If you want two gaskets, you owe me $114. Three gaskets $159, four gaskets $204 etc.

Cheers,
Harv

[Harv]

Everyone who has expressed interest in the gaskets has now been sent a PM requesting payment. Hoping to have these sorted and in your hands no later than end-January.

Cheers,
Harv

[fcee]

Harv did you get my pm ,sent today ,Steve .

[JohnBM]

Sorry Harv , haven’t received any pm re payment details , what can I do to help reg my contact details . Cheers : John BM

[Harv]

Harv did you get my pm ,sent today ,Steve .

PM received, and reply sent.

Cheers,
Harv

[Harv]

Sorry Harv , haven’t received any pm re payment details , what can I do to help reg my contact details . Cheers : John BM

Another PM sent - please let me know if it does not go through.

Cheers,
Harv