News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Ute rear shocker covers

Started by Norm, January 19, 2018, 03:07:33 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Norm

January 19, 2018, 03:07:33 AM
Can anyone help me?
I after the size of the two plates that are use to cover the access holes for the rear shockers upper mounts on a FC ute.

hsv-001

#1
January 20, 2018, 08:39:48 AM
If they are [fairly sure] the same as the van then you are looking at square plates around 10# 112mm [4 1/2"] radiused corners close to the size of a 5cent piece with a 1/8" drilled centre and CSK screws if that helps .

Norm

#2
January 20, 2018, 09:45:28 AM
Thanks for the help!
I thought they were around that size, but I wanted to them to be correct!
Thanks again!
Print
Go Up Pages1
User actions