News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

fc steering box parts wanted

Started by -KIWI-, December 11, 2003, 07:55:52 AM

Previous topic - Next topic

-KIWI-

after fc stg box nut that hold s the pitman arm on and the pitman arm itself prefrablly nos
cheers kiwi

Emu

Got the whole shooting match in my donor car.

It was NOS (In 1959) - Maybe NNS -  otherwise its still in good nick.

What did ya use to remove the pitman arm? Have ya got any suggestions for your old Emu mate about how to remove the pitman arm without a pitman arm puller?

Emu - Puller of Pitmen

mcl1959

best way to remove the pitman arm without a puller is with a crow bar.  Turn the wheel all the way to the right and give a sharp tap with the crow bar.  The weight of the bar will be more than enough to knock the arm off unless some dork has done it up really tight.
Ken

Emu

Hey Ken,

Assuming some dork has done it up tight, and some other dork - who has a long neck and feathers - has removed everything from the   steering column, including the wheel, what would u suggest?

-KIWI-

i suggest u be nice to the kiwi and he will send u his pitman arm (emu leg) pullar

Emu

R u interested in my near new pitman arm nut and pitman arm?

I'm very interested in borrowing your puller.

Maybe you could send it by that high speed freight company that u use! "Kiwi Air" or whatever it is.

Will IM

Emu