News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Headlight mounting

Started by PVB, October 20, 2017, 04:34:25 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

PVB

October 20, 2017, 04:34:25 PM
Ok dumb Q number one. Is there a gasket between the chrome headlight shroud and the body? And has anyone got the part number for the clips that the screws I into?? Or have some to sell.

DJ

#1
October 20, 2017, 05:43:39 PM
Quote from: PVB on October 20, 2017, 04:34:25 PM
Is there a gasket between the chrome headlight shroud and the body?

I think the answer is 'no'.

A range of dust seals & mounting clips/screws appear on the RS site.
http://www.rarespares.net.au/rarespares/SearchPage.aspx?type=desc&pno=0&description=headlight&brand=Holden&model=FE+Holden&car=11e&productgroup=Lamps+%26+Lenses
Dave
0417 270 315

Roybeth

#2
October 20, 2017, 05:47:52 PM
No gasket.

You can just use any uclip you can purchase at autopro/supercheap or wherever - just get ones to fit the screws you want to use and big enough to fit over the edge on the guard


mcl1959

#3
October 21, 2017, 06:16:49 PM
There is no gasket between the rim and the body, but there is a gasket between the rim and the headlight. It is not essential to install but helps keep water from the back of the headlight.
Ken
Print
Go Up Pages1
User actions