Jack Myer

[Not Happy Jan]

Hi All
Just trailered my sedan over to get the headers hooked up. The mechanic says he needs a flange plate to attach to the headers. I thought that he should have been able to make one up?
What have people done ?
Nick

[Harv]

He should be able to source a flange plate. They take the exact same gasket donut as the standard zaust... just two of them  ;D. If he can't find a flange plate, then he can't make a exhaust for any grey motor.

Cheers,
Harv (appreciator of Myers gear).

[hsv-001]

I totally agree with Harv . I have had the same nonsense from exhaust guys [parts fitters ] and ended up making my own and taking them to a different exhaust guy . As we spiral toward a cashless society and real tradespeople retire there is going to be nobody to think on their feet and do this sort of work .

[zulu]

Look at this on eBay
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F111682161319

I think these fit

[FE_UTE]

Heres a pic of the plates...nothing special 6mm thick...as Gary said the ebay ones should do the trick

[FCRB26]

Ill shoot nick a set monday cut on the waterjet.

[Not Happy Jan]

Thanks for all your replies. Pete has come to the rescue again for me.  :).
Don't have much option up here to take some where else.
Harv is there a preferred method of design for the engine pipes for the headers?
Should he have the flange gasket??
Nick

[Harv]

Typically two pipes off the headers, joining into a single pipe not too far from the firewall (normally just after the firewall, under the car). The flanges are normally slip-on (not weld-on), with the engine pipes flared to retain them. Can also weld-on, provided he is confident on alignment (tack first). The gasket donut is available off the shelf - he should have them, if not SuperCheap does.

Cheers,
Harv

[Harv]

From SuperCheap/Repco/Autobahn etc, the flange gasket donuts are ACL JE359.

Cheers,
Harv

[hsv-001]

Junction not as far down as to affect your idler arm . I have had some exhaust guys adjust my drag link to get clearance only to find I cant steer my car home because it is pulling to the left as the steering box tries to centre itself .

[zulu]

I have a 2 in 1 out muffle on mine and makes the right noise and goes well even though the pipes are long

[Not Happy Jan]

Thanks Gary