FC Ute

[FireKraka]

Hey Pete I see you are using the Haltech Sport 1000 is that a direct plug and play with the engine wiring harness or are you rewiring the harness I look on the website and I thought the GM one was direct plug in.

I've just finished freshening up a V6 that I got from Ebay that is pumping 227rwhp for my FB/EK ute project and missed out on getting the Haltech with it so if you or anybody has one just laying around I would be interested.

Regards
Neil H

[FCRB26]

Hi Neil

Its a full loom not a gm haltech as we only end up using 1/4 of the loom to keep it neat.

Same features i think tho.

Im running ice igniton with twin sensors ao i can run semi sequential injection.

[FCRB26]

Productive weekend
New alternator fitted
Bonnet hinges fitted
Some of the exhaust fitted.
I need to get it on the hoist to get the rear section on.
All rear panels fitted with a little cursing.
I fitted a new tv and big surround sound system as payback for the new neighbours 3 day party last weekend.
The v8s were on full song for 6hrs.







Sent from my SM-G920I using Tapatalk

[fcwrangler]

WOW Pete, the ute is looking fantastic, another top job coming together. Have you worked out what you are doing with the bed as yet?
Jim

[FCRB26]

WOW Pete, the ute is looking fantastic, another top job coming together. Have you worked out what you are doing with the bed as yet?
Jim

I have changed my mind 4 times so not real sure as yet..

[FCRB26]

Made These fiddly little buggers this arvy.
2 cut finger tips make them hard to hold to tap .
2 more to fit yet.






Sent from my SM-G920I using Tapatalk

[Longman]

Nice Pete. I think you should make/sell those! I'd buy a set.  ;D

[FCRB26]

Nice Pete. I think you should make/sell those! I'd buy a set.  ;D

Yeah not gunna happen  :D

[FCRB26]

Works crazy so have only had real limited time on the ute.
Ordered a oil cooler for under the ute.
Their mounting  kits horrible if you have ocd the fan sits on the piss 20 degrees and only uses 2 screws.
Bugger that
I made a bracket that will be powdercoated and goes between the inner sill and chassis rail.
I need to put a stone deflector over the core.
I ordered the pwr core with davies craig fan and temp switch that will utilise a output and relay from the haltech.






Heres one that pissed me off nearlly 28 bucks  for wiper gaskets bugger that 26 seconds to cut on the waterjet.
So if anyone want some 10 bucks a pair free delivery.


.
Also bumper bar bolts i opted not to fit bumperette rubbers.
These are stainless mirror cupheads
And i found door stop rubbers the perfect size between bar and body 3.30 each and bolts under 3 bucks

Next i want to hide my guages as haltech will have engine protection so is only so i can see whatshappening on hot days.
So cut a spacer and guage mount to fit in speaker grille.
16mm ally cuts like butter.
Will powdercoat black.
If people want a speaker blank its on file now.




.
Well that was a post and a half.


Pete

Sent from my SM-G920I using Tapatalk

[DJ]

Well that was a post and a half.

Love the practicality & detail in your refinements Pete.

[Errol62]

Would like a pair of those wiper rubbers Pete. Will pm my address. Reply with EFT details if you're willing.
Cheers
Clay


Sent from my iPhone using Tapatalk

[Ol_Girl_58]

Brilliant work as always, Pete.

What's under the tarp?

[FCRB26]

Brilliant work as always, Pete.

What's under the tarp?

The wagon
As when i mow shit goes under the eaves and dirties it.
I have a show next weekend and no time to clean it or the van so leave it covered.

[FireKraka]

I'll have a pair of the rubbers too Pete I will pm when I get a chance mate.
Regards
Neil H

[Longman]

Put me down for a set of rubbers thanks Pete.

[FCRB26]

I will reply to everyone tonight.

I cut a heap today.

[camxsmith]

Hi Pete   Would like to grab a pair of the rubbers of you mate .. hope you been well

[FCRB26]

Hi Pete   Would like to grab a pair of the rubbers of you mate .. hope you been well

Hi Mate

Very well yourself ?


Pm me your details

[CraigFC]

To good Pete, once again blowing our mind with the level of detail you bring to the party.....

[pbh0069]

Hi pete

put me down for a pair of rubber please and also still waiting for a bill from the last thing you sent

cheers  ;D