News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Raising rear ride height

Started by njf690, June 03, 2016, 05:47:03 PM

Previous topic - Next topic

njf690

Guys after advice on lifting the rear ride height on the FC sedan . She is scrubbing on the new rims . I will roll the inner guards but still think the ride height has to come up . Also shocks of any one can recommend some I'm in Brisbane . Don't know how to post pictures

FCRB26

you can fit a LJ diff to get them tucked under.

I only use monroe GTs..

Is this the facebook one with 15 inch smoothies ?

Errol62

A couple of extra leaves eg ute or van springs will give you one or two inches. Monroe gas from super sprint barn will do for dampers.


Sent from my iPhone using Tapatalk

mcl1959

Wagon springs have 1 more leaf and will stiffen up and lift the rear a little. Ute or van springs have 2 more leaves and will double the lift.
i like Monroe shockers as well but don't use a pump up shocker as these will crack the mounts on the rear floor

Ken

njf690

Yeah the missus put it up on Facebook

FCRB26

Quote from: njf690 on June 03, 2016, 09:51:25 PM
Yeah the missus put it up on Facebook

when you say roll the rear guards i remeber doing this when i was 15 on my sedan and they are extremely hard as its a multi layer panel ends up cracking the radius on the edge and still doesnt achieve much as the inner guard steps in pretty quick as well was a lesson learnt.

What size tyre are they ? i just fitted 15x7 alloy wheels to my wagon cannot remeber the offset and with 205 50 15  and they rubbed ever so slightly and mine is pretty low .

Have a quick look at my wagon page http://forum.fefcholden.club/index.php?topic=25767.20


If you want to go up on the springs mark which is left and right pull them out and take to a spring mob . I just had a set lowered for $280 from memory but im sure going up is the same.


njf690

They are 15/6 rims right round . They springs have been reset .

VAN059

If you're south, try talking to Bayside Springs & Blacksmithing. They can reset for lowering & reset/add for raising.

They've reset my rear springs on a few of my earlies over the years, and I've never had an issue.

Cheers
Smokin Words and Shoutin Turds

njf690

Yeah that who did them . I will give them a call and see what he can do