News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

vh 24 brake booster

Started by fcee, May 02, 2016, 04:10:11 PM

Previous topic - Next topic

fcee

My fc vh 24 booster has developed an air leak when the brakes are applied ,and is in need of surgery ,after many phone calls to reconditioners and hearing the same result ,no parts available for that booster I have fitted a vh 44 booster ,it works fine but not the correct booster for fc ,hard to maintain originality in this situation .be aware as their are vh 24 boosters for sale on ebay that need reco which is not possible .cheers Steve . :(
Sale Victioria

slack one

Hi steve have you rang Hydro-boost.Cheers Gary.

fcee

Yes ,hydroboost ,hoppers stoppers ,south aus ,many others ,all same story . Sad .cheers Steve . :(
Sale Victioria

hsv-001

Many years ago [in my teens ]I was offered an early Jag but turned it down because it needed a total hydraulic system rebuild . A decade later I was working for an auto parts company selling and buying parts internationally . I remember looking through a catalogue with PBR parts and cross reference to European and Yank parts and wishing I had taken the Jag . Many years ago someone gave me a VH24 for my old Holden but very quickly realised that the corrosion had got the better of it and lots of it was breaking as I pulled it apart . It sat on the shelf for a few years and I often wondered if it was worth another try but opted to tear down the VH40 I had [with an air leak similar to yours ] and repaired its holed out diaphragm with a vulcanizing patch . I guess what I am saying is it might be worth a wider vision when looking for spare parts . ROCK AUTO in the USA will find and ship world wide and many companies you may think extinct are so only in Australia . Cheers Haydn 

fcee

Thanks Hadyn ,I have fitted the vh 44 to keep me on the road with reasonable brakes , but have not given up on the possibility that someday the vh 24 may be able to be rebuilt ,only a matter of finding a supplier of parts ,seems that p.b.r. have stopped making the bits .cheers Steve :(
Sale Victioria

hsv-001

Yeah ,I was looking at that before replying to your post this morning .I guess that prompted my memory . This might be a clue .I was working for a company GKN Autopart hence the PBR cross reference .They had bought out Awlco Stennor .Can't remember if that's how it was spelt . This was back in 1987 I think . Now the thing is that my daughter over revved my imported Mazda diesel and dropped a valve a few years ago and because of the rarity of replacement parts I had to buy them through Rockauto [USA]and when the water pump arrived it had been purchased from GKN in England [still trading] they stopped trading in Australia [bought out by Ecklin I think] not long after I resigned  . All I am saying is pull the diaphragm apart and have a look ,it may be an easier fix than you think . Haydn

ehsv6


aldo

VH24 booster rubber on ebay for $50

fcee

Thanks Aldo ,found a guy in qld who had some ,and fitted to my booster ,will put it on when the 44 dies . ;)
Sale Victioria

Errol62

Power Brakes SA are now supplying a suitable diaphragm for the vh24. Sourced from a modern booster, uses an adaptor plate to fit the vh24 rod. These guys have an excellent reputation going back to my long lost youth. Many a cast aside vh24 can now be resurrected it seems.
Cheers
Clay


Sent from my iPad using Tapatalk

aldo

Power brakes SA can supply all the parts, bought several kits off them recently and the main rubber is available on ebay, Always best to use original type parts however they have done a great modification. Havent seen one but I understand you can see the spacer when assembled.

fcee

 ;) Shows you what can be achieved when people think outside the square .good news .cheers Steve .




Sale Victioria

hsv-001

Yep, thought as much . When I wrote here I neglected to tell you that the parts I was referring to were available through a company GKN . The company no longer exists in Australia ,but are still large in England and supply through most of Europe . I brought a rare water pump off them just recently .