News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Alternator installation

Started by Wasim, August 30, 2015, 05:59:52 PM

Previous topic - Next topic

Wasim

G'Day,
          Is there any link to a post on the forum on how to replace the generator with an alternator including brackets and wiring?

Thanks, Wasim
South Australia

collecta

 Hi Tony, my Ute runs an alternator your welcome to have a look at the (grey motor)conversion.
cheers
Scott
i collect old holdens coz they never die!

Crumpsnr

Hi Wasim,

I have a primitive drawing that I could jazz up a bit showing all connections. I'm no electrician so the drawing is pretty basic and designed so I could follow it years later! I'll track it down and get back to you. I can recall it's for an external regulator setup.

Regards,

Martyn

Crumpsnr

Hi Wasim, these are pretty rough drawings I did about 25 years ago. Looks like I had 2 different types of alternators. No doubt some here will be able to make sense of what I did. I had no idea but they worked! Now that I look at them they seem less about a conversion than just a setup for red motor electrics. Not really sure if this will help but better i put them up and let you decide. Regards, Martyn




mcl1959

This is a diagram I put together many years ago



Ken

Wasim

Thanks for the replies everyone.

I found this bracket on the web - looks OK - gives me the idea of what I need to do?


Regards, Wasim
South Australia