Firewall Bulkhead electrical wiring connector

[Old_Mt_Isa_Boy]

http://www.bangshift.com/forum/forum/bangshift/tech-section/32575-billet-electrical-firewall-connector

I think I have made the classic mistake and should have installed something similar to the attached link particularly considering all of the extra wiring I have in mine. Anyone seen anything like it?

it just looks ugly now. Will be fixing it.


Regards

Wayne b

[FCRB26]

We just used a duetch 32pin plug with a heatshrink boot on the torana looks great.



http://www.newark.com/deutsch/hdp26-24-31pe-l017/plug-hdp-31-pos-pin/dp/91R0967

[JB]

I had a decent hole in the firewall as well.
Used a bit of rubber from Clark rubber to make a custom one. It was 10mm thick, and I cut a groove using a thin grinding wheel. Came up great!
Will try and get a photo if you would like one.
Cheers,
JB

[NES304]

The VT was a bitch in the fact there was no plug at the firewall.

[Old_Mt_Isa_Boy]

Good idea Pete and use a backing plate to match the existing hole through the wall.

Thanks

Regards

Wayne b

[FCRB26]

But dont use the pins that come with the plug if you want 1 my bloke will get it in.
I have heaps of the right pins to use and will loan the bling crimpers.

[Old_Mt_Isa_Boy]

Thanks Pete will let you know.

Regards

Wayne b

[fe350chev]

Pete, u will have to start your own online ordering system soon 😃