News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

fuel tank

Started by cruiser, October 10, 2014, 08:40:25 PM

Previous topic - Next topic

cruiser

Hi
I have an fc ute and have put I a vn v6 motor. The trouble I have is the exhaust system is running where the fuel tank should be.Would it be possible to move the tank forward. The problem is fabricating a tank that will hold enough fuel because of the transmission  tunnel or dose any one already make a tank for this set up.

mcl1959

You could put the tank in the tray area under the rear window. Filler would go through the rear quarter forward of the original position.
I put an upright tank out of an early Mazda into the boot of an FC sedan many years ago and it worked well.

Ken

cruiser

Thanks Ken I will take some measurements to see how that would work.

Old_Mt_Isa_Boy


http://forum.fefcholden.club/index.php?topic=15344.20 Page 2 is the key page if the link does not go to page 2.


Try this build. I unashamedly copied what Pete had done in my build HAVIN A GO. Some 50mm box as a frame fitted an 80 litre commodore tank in perfectly. I used some straps on top to bolt down.

Regards

Wayne b

Old_Mt_Isa_Boy

Oops sorry Jason. Don't know where Pete came from.  ;)

cruiser

Great another idea to look at

cruiser

has anyone have any more ideas any help would be great

NES304

I answered this in another fuel tank topic yesterday???
Anyway put em through the springs.
This is prob what I'll end up doing.

And dump em out each side as per engineer suggestion



cruiser

Now that's a good solution dose it retain the original fuel tank because I would like to increase the capacity

NES304




cruiser

Great I will get that sorted soon thanks for your replies :)