News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Hi all

Started by fc_holden2014, August 30, 2014, 03:20:26 PM

Previous topic - Next topic

fc_holden2014

Hi guys. My name is Thomas, I'm 33, and I'm from the Mid North Coast of NSW. A couple of weeks ago, I purchased a 58' FC Special sedan that had been in a shed for the last 45 years. In that time, thieves had broken into the shed and helped themselves to quite a few parts off the FC. Since purchasing the old girl, I have started stripping her, getting her ready to be placed on a rotisserie, ready for bead blasting. The only real rust I have found is a 5mm diameter hole in the drivers side floor and that's it. My plan is to do a complete factory resto, and as this is my first full resto, I will need some help and advice, so you will be hearing from me a lot more. I'll leave it there for now........ Thomas

Old_Mt_Isa_Boy

Welcome Thomas. Maybe you could start with some initial photo's in the Project Section. Not a bad way to keep track of you build. Good luck.

http://forum.fefcholden.club/index.php?board=37.0

Regards

Wayne b

customFC

Sounds like a nice score.
Welcome to the forum.
Looking forward to some pics along the way.
Regards
Alex