News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Glenn_M's Van

Started by Glenn 'Stinky' Stankevicius, November 13, 2009, 01:20:21 PM

Previous topic - Next topic

NES304




JB

To put a v8 in there the way it is set up would mean losing the air cond if you didn't severely recess the firewall, as you would lose the room for the thermos fans pushing everything forward and the condenser wouldn't have room in front of the radiator anymore.
Or if you wanted to keep the front the way it is now then would require a firewall refresh as I have done in the ute to accommodate the extra 2 cylinders... Either way not a little job, but a lot of fun doing it! Lol
Probably a set of Caltracs on the back to get the power to the floor as well lol, I know you like it sideways...

Cheers
JB
Phone +64 223509263

NES304

Nah what JB means is that the plugs are the same for V8 and the mounts are too... Although you may need to move his forward to negate moving the fire wall. Wafer thin thermos then!(and keep aircon!!)



hsv-001

Different engine harness and computer, not sure about tranny.Haydn

NES304

Quote from: hsv-001 on July 11, 2014, 04:57:34 PM
Different engine harness and computer, not sure about tranny.Haydn
Read my thread (when I went from 6 to 8) engine harness comes with engine and uses same body harness plugs as VT V6. Need an 8 computer but u buy that with the engine. Bell housing different on the box so-
Buy a complete engine box harness computer (and I'll give you the HSV tune) and the V6 conversions gearbox mount is turned backwards exactly the same as a commodore does to suit the new gearbox position.
Then I'll reprogram your instrument cluster to be on police mode with digital speedo!
Too easy.



TTV6FC

And how is that V8 conversion going NES?
Run your fingers over my Holden and I'll run my Holden over your fingers!!!!

NES304

Very slowly. Expect photos soon of the chassis rails!



GM

I think another project may be the go, sell the f#*d and get some funds
Upon the hill there stood a cow.
It must have moved, It's not there now.

NES304

Quote from: GM on July 12, 2014, 02:53:15 PM
I think another project may be the go, sell the f#*d and get some funds
Feel free to come up and check mine out Glenn!



GM

Upon the hill there stood a cow.
It must have moved, It's not there now.

NES304




GM

Upon the hill there stood a cow.
It must have moved, It's not there now.

JB

Phone +64 223509263

GM

Dunno Jason, something will turn up. Not looking very hard yet
Upon the hill there stood a cow.
It must have moved, It's not there now.

NES304

JB will buy the van!!!



GM

ha ha, and I get his fc ute
Upon the hill there stood a cow.
It must have moved, It's not there now.

GM

Upon the hill there stood a cow.
It must have moved, It's not there now.

JB

Find a 37 1 1/2 ton Chevy truck... I want to do some interesting things to one of those next lol...
Phone +64 223509263

GM

When you find it, drop it to me. With the ute ;D
Upon the hill there stood a cow.
It must have moved, It's not there now.

JB

Hey Glenn,

Found something you may like to see.
This is how the van started out... Not bad for $800




Phone +64 223509263