HQ to WB front doors

[brett_f]

Hi guys, Have a mate that is looking for good HQ to WB lh and rh front doors. No rust or dents. Can be bare. In Melbourne.

[john253a]

what front guards and rear section does he have

because they all bolt up the same

BUT the factory curved crease above the fold line is different, and something he may wise to consider, unless he planes to rework the panel and remove it as many other do to active a perfect flat panel

[brett_f]

Hi John, I may be wrong but i believe they are all the same. I know the moulds are different. The vehicle is a HZ station wagon with standard guards.
Brett

[fcwrangler]

Not sure about the actual shape of the doors, but the HQ takes a different door glass to the rest. It has a small filler piece at the joint of the door and upper frame at the front of the door so the glass is cut off flat.
Jim

[fcwrangler]

Just read your reply, if it is a HZ then you will need HJ on doors.
Jim

[brett_f]

Thanks guys, so HJ onwards doors are  required.                 
Brett

[fe2ek]

Being picky, I think some older ones don't have the intrusion bars but could be wrong.  Pretty sure commercials of that vintage didn't.