RE Catalouge of FE FC parts

[FCRB26]

Heres my first efforts at a collage  ???







I understand theres probablly issues with copyright infringments on the Holden logo it was a sample to see if i could do it.


Pete

[Crumpsnr]

Wow. Impressive. I'll be in touch for a few things when I get further along. Great work mate, Regards, Martyn

[Glenn 'Stinky' Stankevicius]

How deep does the engraving go?
I had a set of centre caps machined up years ago with blank centres and was thinking of getting stickers made, if you can engrave deep enough (1-2mm?) I could paint them instead.

[FCRB26]

Their cnc routers travel is about 80mm deep for timber ect.
We do the infill with stndard colours.
Ill send you pic when I get to work.

[FCRB26]

This was one we did for the engravers ute just covered his tow bar.

We have learnt a lot more since this note the paint is slightlly scuffed from cleaning up whilst still a bit wet.


have it all sussed now..

[fcwrangler]

Pete, I think you will find that the logo is under copyright, this is why Olden1 had to stop making the grill emblem inserts for the FC grill badge.
Regards Jim

[FCRB26]

Yeah understand..

Funnily enough it was a sample logo that came with the machine.

I didnt plan on doing any more it was just to see if it worked.

I understand theres probablly issues with copyright infringments on the Holden logo it was a sample to see if i could do it

[Trevor_B]

BTW, Rare Spares holds the current copyright for the NASCO logo.

A couple of us from the VIC Club were there today and they had their copyright registration for "NASCO" in the front office reception right beside the RSP Business registration so I think they take copyright seriously as well....

Trevor_B

[FCRB26]

There you go i didnt know about the nasco logo.


Dont really care either the amount of NASCO stuff on ebay thats knocked off im sure im the least of their worries
Mines modified for the waterjet so therefore its more than 10 percent different so it doesnt breach copyright..

Thats what happened when a competitor copied one of my products that has a patent any more than 10 percent they cant do anything.



Pete

[les]

There you go i didnt know about the nasco logo.


Dont really care either the amount of NASCO stuff on ebay thats knocked off im sure im the least of their worries
Mines modified for the waterjet so therefore its more than 10 percent different so it doesnt breach copyright..

Thats what happened when a competitor copied one of my products that has a patent any more than 10 percent they cant do anything.



Pete

Pete
I think you will find there is a difference between patent and Trade Marks copyright
Les

[FC427]

Pete what size s/s exhaust flanges are you producing  Thanks ......FC427........

[FCRB26]

Whatever you want pretty much.
2 bolt 3 bolt tapped 1 side or bolt together.
Tell me what you're after. .


Pete

[FC427]

Pete Will measure up and let you know Thanks ...Fc427.....

[FC427]

Pete need  8 x 2 1/2''  & 4 x 2 1/4'' center hole size ,, all 105mm bolt centers with 10mm holes all bolt together in S/S Please ....FC427....

[FC427]

Pete need  8 x 2 1/2''  & 4 x 2 1/4'' center hole size ,, all 105mm bolt centers with 10mm holes all bolt together in S/S Please ....FC427....

Pete PM sent

[Ole]

Hi Pete, can you give me some info on your exhaust hangers please? I am after some to suit a 2.5 inch system. Do they bolt together or how are they attached to the pipe. My system has flanges on the ends of each section of pipe.
Regards Ole.

[FCRB26]

todays mission to repro grille badge bracketry for keith
Think I succeeded

Sent from my GT-I9505 using Tapatalk

[DJ]

Very nice job.

[KFH]

Looks great Pete.  Look forward to receiving it.  Thanks

Keith

[FCRB26]

Will make sure they fit tommorow then i will post