FC Ute

[Chuck]

Kalori heater?

[FCV08]

Peter

I fitted a similar heater unit. Works well.

Like the thermo fan mounting plate.  ;D

Cheers

Craig D

[pedro]

Wow didn't realise the heater was so compact, that'll make it a lot easier to fit under the dash.
  Pedro

[FCRB26]

Thats why I sat the remote there.
They sent the wrong one they were out of stock of the compact model single blower 2sp its roughly 200x200x100 tiny

[FCRB26]

Got my gearbox back today  showed me it was pretty rooted basket was stuffed stripped drive gear for something.
Corvette servo and pin arrived.
Left old pan on till I get it running.
New pans in the pic.
Also machined the bit the column will locate in at the bottom.
Both rails tacked up, I need to modify them as im not happy with them hard against the floor it will be a moisture trap.
So ill notch them a bit to clear the rear pan.
All in all a productive day.

[NES304]

You have a nice box Pete  ;D

[fe350chev]

Yeah a nice black one

[FCRB26]

Earlly morning start drew up new brake line brackets and assembled.

[Ed]

nice brackets  8)

[NES304]

nice brackets  8)

Hell yeah they look the goods

[fe350chev]

The heater looks like a smoke machine. Why do u need one of those, isn't that what tyres are for  :P ???

[pedro]

Opposite way around Deano you need that so you can breath while the tyres are smoking up ;) :D
  Pedro

[FCRB26]

Thinking about making a few engine bay blank kits theres a few more holes to add would be about 5bucks saves a lot of cutting

I love my air hacksaw some are rubish this bahcho one smashed it in under 30sec welded plate and ground under 4min.


I dont like overlapping hence why I cut it out.

[fe350chev]

Is it gunna be column shifter. I am gunna use a b and m shifter cable for the column to select on the t700.

[FCRB26]

Ill use the little pro ratchet shifter I have paint it up old school.

[FCRB26]

Finally did some work on the UTE lifes bloody hectic so cars have been on the backburner. (and doing others bit and pieces)
Rolled a new tunnel and swaged it.
Modified the firewall a bit in the process.
Started manufacturing a new pedal box assembly.
heres pics of my colum mounting plate.
Still got a lot to do to get the firewall how i want it.







Pete


Sent from my GT-I9305T using Tapatalk 2

[Ole]

Looking good as usual Pete, what type of column is your mounting plate designed to suit?
Regards Ole.

[FCRB26]

I just made a lucky dip column vk lower fc upper pinned with m3 nylons.
Old mate round the corner does exhaust s let me loose flared a bit machined it worked good.

[Ole]

Thanks for that Pete, it looks very neat. You did a good job flaring the pipe, I had a local exhaust guy flare some pipe for me but he couldn't get it anywhere near as neat as yours.

[FCRB26]

I had to machine it afterwards was a little on the piss.
I machined an inner and welded an end into it then i pressed it into the flared section. A little overboard but looks neat.