News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

new front windscreen

Started by GMHwagoon, March 29, 2013, 07:28:39 PM

Previous topic - Next topic

GMHwagoon

gday

lm in melbourne  can anyone tell me where l can get a new front windscreen for my fc

     thanks greg

Bob_FC_Ute

Holden FC-FE 4DR Sed/Wag/Ute/Van Front Windscreen
This is on Ebay - Musclecarpartsaus   for $195 New
They have quite a range of parts for lots of different makes & models
Regards Bob

GMHwagoon


Stewy

This one Greg.
[ebay] 271175772629[/ebay]


Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

geebeefc

I got a new laminated screen with a tint from Novus, no problems. Wasnt a lot of coin, either! Cheers, Glenn

NES304

Is it possible to buy new door glass with no metal attached to the bottom? ::)
Cheers



FCRB26

Yes i can cut it but it needs to be toughened and has to be stamped to say its legal.
Ill ask chop shop they are getting ek glass done in sydney.

JOX515

Nes, I got my local Windscreens Obrien bloke to cut me up the proper glass - fairly cheap too.

FC427

I have had laminated tinted and clear [slight tint because of the bonding material between the sheets of  ]'' FLAT ''glass cut for a few cars over the years only thing it was 1.2 mm thicker than the original  safety glass but went in the Bailey OK ......FC427........
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

fcwrangler

Nes, Flat glass industries at Moorebank can cut any size you need, they do the toughening process and put the as stamps on the glass as well. All you need to do is supply a cardborad or ply template and tell them where you want the stamp and they do the rest.
Regards Jim
on the seventh day: God Made Holden

FCRB26

Your all over it Jim.. ;D

I only give half an answer..

Pete

Maco

Hi Pete,

Can you supply the bottom glass metal channel assembly?

Cheers

John
Better in Green

FCRB26

Ill have a look tommorow arvo if i can get the folds.

NES304

Quote from: FCRB26 on April 18, 2013, 09:13:23 PM
Ill have a look tommorow arvo if i can get the folds.


When are you releasing your supply book???



FCRB26

Between 2 nocturnal kids under 3 and a moody 10yr old and building 2 cars and work ill get there.
Good job for secetarys next week.


Pete

NES304

Quote from: FCRB26 on April 19, 2013, 04:11:06 AM
Between 2 nocturnal kids under 3 and a moody 10yr old and building 2 cars and work ill get there.
Good job for secetarys next week.


Pete
Amen