accelorator pedal and cable

[blakbrute58]

what pedal and cable would go into fc with red motor

[Harv]

Any pedal and cable will fit, if you have the patience and gasaxe skills  ;D.

Only kidding -  HZ fits OK, as does Commodore. The Guide below gives a step by step process for fitting Mitsubishi cables in a simple (bolt up) way.

http://fefcholden.org.au/forum/index.php/topic,20117.0.html

Cheers,
Harv.

[mcl1959]

There is also a thread on this site with pics of fitting a Commodore cable. Very easy once you have the mounting bracket sorted.

Ken

[FCV08]

After modifying and fitting a VN pedal setup I had a look at a VR-S and the mounting bracket looks a whole lot easier.

Cheers

Craig D ( Build - Here we go again!!)

[NES304]

I have a VT setup which is quite good. Previous to that for my grey I had a Rare Spares one that fed the cable through and acted as a bonnet hinge bolt. I now no longer need the pedal and you can have it but I am using the rest of the cable.

I also have a full VS set of pedals with booster and brake master. I am wanting to sell them with my V6 and may be coerced into separating them.