News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

fe ute id

Started by kalfe, September 04, 2003, 10:41:10 PM

Previous topic - Next topic

kalfe

hi all
im looking for the id number inside the engine bay
i have been told its near the battery box or regulater
ive looked around that area but cant find it
can anybody tell me actually where it is
maybe im going blind heheh ;D

ACE

Hi kalfe,
Have a look at the upper R.H fender skirt.
 (Opposite side to where you are looking).
Regards ACE 8)

colt

kalfe,
Sometimes they seem to be really lightly stamped, making them hard to find. Many coats of paint in the engine bay can make them hard to find also.
Colin
colt

RET

FE chassis numbers are usually on the passenger's side, in the area you mentioned.  They are often stamped on the convex curved surface of the inner guard, which can make them very hard to find.  Especially as the numbers are only about 3/8" tall, unlike the FC and later ones that are closer to an inch high.  Feel along that curved edge for them, and try rubbing some talc on them if you can't read them (this doesn't work on india ivory inner guards ;))

I've got two FEs, one from Sydney and one from Melbourne.  The Sydney car has the numbers back near where the regulator used to be, but the Melbourne car has them about the middle of the battery box.  In both cases they're on that curve I mentioned.

Hope that helps.

RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...