News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Replacement Floor Pans

Started by FC_NUT, June 05, 2012, 09:48:50 PM

Previous topic - Next topic

FC_NUT

Hi all,

Could anyone tell me if Rare Spares are the only one's who sell floor pan sections???

Cheers

Damo
Daimien,   

Carrum Victoria

Ed

Hi Damo,

I recently purchased some front floor pans from Rare Spares and outer sills from Retro Rods. 

As far as I am aware and was advised by Sydney store, Rare Spares are the only major distributor of the floor pans and have stopped making the outer sills.

The front floor sections are of a good quality and in my opinion and experience fit very well.

Hope this helps

Ed


in the shed

Stash

have a front left if you need it.

Ed, do you know if Retro Rods still stock the old Rate Spare ones?
I put a basic extrusion piece, but not a complete sill.

FC_NUT

Thanks Ed,

for the heads up, what are the outer sills like are they formed up at the ends?

Damo
Daimien,   

Carrum Victoria

Ed

Hi Stash,

I spoke with Gav and he didn't mention any old rares products.

Damo,

The sills are just a straight section, so the ends will need to be shaped to get the curve at the dog leg.  I normally join them before this, but this time I'll be needing to fabricate something.  Profile wise I've used them on a couple of other cars and they are a very good fit.

Cheers

Ed
in the shed

pedro

Just give Gavin at Retro Rods a ring Stash he's a decent bloke, I've rung him and then e-mailed a plan of what I've needed and he's had it ready the next day at very reasonable prices, he stopped making floor pans because he wasn't happy with the fit but the last time I talked to him he was talking about starting to do them again, I also used his sills on my wagon and there was no problem with the fit.
                 Pedro
I love animals - they taste great

F4+

Stash

thanks pedro. when you say plan? he made custom panels for you?

John

pedro

Not panels for me although I'm sure he would do some, I got him to knock up the piece of subframe that goes under the radiator, a couple of eyebrows and a rear top of guard section he was going to make me a wagon petrol tank surround but I ended up going down a different path, he makes vintage bike petrol tanks, wheel spats for customers all over the world and all sorts of custom stuff, as I said just give him a ring and ask him he's very friendly and helpfull, tell him you're with the FE/FC site and Pedro who used to live in Hervey Bay recommended him.
               Pedro
I love animals - they taste great

F4+

Stash