News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Fc wagon rear floor vinyl, diamond pattern. Side panels

Started by MAF, April 01, 2012, 11:35:04 AM

Previous topic - Next topic

MAF

Hi Guy's

I'm looking for the light grey floor material with the diamond pattern. I heard someone brought some in from the US a while back.  I'm also after a good set of the side panels that are in the rear luggage area of the wagon.
MSG me if you have anything.

Cheers
Mike

Glenn 'Stinky' Stankevicius

I am looking at bringing a roll of the vinyl over from the US, I have sent emails out to all clubs and notified forum members.

So far the response has been very lukewarm, with only 3 people expressing interest and nothing back from the clubs. I can add you to the list of potential customers if you like, I'll be deciding how much to bring over in mid-April.

MAF


Glenn 'Stinky' Stankevicius

If I bring a roll over, around $60-65 per metre plus freight, if I get a smaller amount then possibly more per metre.
Taking measurements off a wreck it looks like 3 metres is needed, if anyone has better measurement then please let me know.

Stewy

stinky, how wide is the roll ?
I can work it out from that.

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

Glenn 'Stinky' Stankevicius

Generally they are 1300mm, but I'll confirm with the supplier.

Stewy

You could do it comfortably out of 2.350cm long x 1.200cm wide.

That is all six pieces so 2.5 metres would be plenty.

Tailgate   1100mm wide x 350mm long

Spare wheel cover  1000mm wide x 620mm long

Cargo space  1150mm wide x 530mm long

Back of rear seat  1200mm wide x 600mm long

Sides of Spare wheel cover 2off  250mm wide x 600mm long

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

MAF

Sounds good to me.  Are you going to stitch up the bits to the sides of the spare wheel well

Stewy

I know that stinky can do wonders with a needle and thread or a sewing machine.

The original vinyl that is still in my wagon will give a good guide of how to stitch it together.

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

Glenn 'Stinky' Stankevicius

Thanks Stewy, would you be able to shoot a picture off to glenn@streettrim.com.au, thanks.

Quote from: Stewy on April 01, 2012, 07:31:11 PM
You could do it comfortably out of 2.350cm long x 1.200cm wide.

That is all six pieces so 2.5 metres would be plenty.

Tailgate   1100mm wide x 350mm long

Spare wheel cover  1000mm wide x 620mm long

Cargo space  1150mm wide x 530mm long

Back of rear seat  1200mm wide x 600mm long

Sides of Spare wheel cover 2off  250mm wide x 600mm long

Cheers Stewy   8)

Glenn 'Stinky' Stankevicius

Quote from: Stewy on April 01, 2012, 06:39:55 PM
stinky, how wide is the roll ?
I can work it out from that.

Cheers Stewy   8)

Confirmed at 54inches or 1370mm wide.

Stewy

No matter how much you push the envelope, It'll still be stationery

MAF


vivan

would love to get in on some rear wagon vinyl action if not to late . pm or text to viv 0419265326 if i havnt missed the boat thanks

Gordon

I would also be interested in the vinyl if not to late Thanks