Wiper washer block

[brett_f]

Hi Guys, just wondering how they use the wiper washer block to spray the windscreen. I have the two blocks with tubes for the hoses however there are screws blocking what i believe would be the area for the sprayers. Is there something that should replace the screws. if so does any one have any or a picture of what they look like.
Regards brett

[Old_Mt_Isa_Boy]

Here you go they come up ocassionally on Ebay. Here is a link to some discussion a couple of years ago.



http://fefcholden.org.au/forum/index.php/topic,17580.0.html

Regards

Wayne B

[brett_f]

Thanks wayne. makes sense now.
Regards Brett

[Harv]

Brett,

This may help:
http://www.scribd.com/full/52759445?access_key=key-kxqe4whgmxhdfp90wj5

Cheers,
Harv.

[fcwrangler]

Brett, type in wiper washer jets on ebay and you will find a couple of listings for fe/fcs, they say new stock around $50.
Regards Jim   ps I will be ordering a set.

[brett_f]

Jim,
The ones on ebay look to be a single peice. The ones on waynes message show a two piece.
Regards brett

[fcwrangler]

Thats an old post it shows two different types.
Jim

[mcl1959]

The 2 piece unit with a larger hexagonal base followed by a smaller piece at right angles (as shown in the pic) is the real deal NASCO unit which is the most desirable set. The one piece is a later squirter that also works but is non genuine.

Ken