News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Water protection

Started by JB, February 04, 2002, 07:13:32 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JB

February 04, 2002, 07:13:32 AM
When replacing sections that have corroded I have noticed some kind of corking conpound to reduce that amont of water remaining in spots, or possible for noise reduction.
Does anyone know what would be the best product to replace the old stuff with?
Regards
Jason.  :)
Phone +64 223509263

mcl1959

#1
February 04, 2002, 12:09:11 PM
I used a product called "Nitto Seal" purchased from a GMH dealer in Victoria.  This is the same compound as they fitted in the 50's and 60's only in a new tin with a new name.  Also perfect for covering the trim clips which protrude into the engine bay from the cabin to get that original "factory" look.

hope this helps    Ken
Print
Go Up Pages1
User actions