News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Which Sealant

Started by KFH, June 01, 2011, 08:31:24 PM

Previous topic - Next topic

KFH

What is the best sealant to use behind logs of the paint separator strips on the rear quarters and like places?  Obviously you would need a non hardening one.

Keith
I was born with nothing and still have most of it left

stephen

Hi Keith .. I used the same black goo that the windscreen guy used on my windscreen and it works OK .. seals against the weather and does not go hard, easy to wipe excess off with mineral turps .. hope this helps .. Regards Stephen

ACE

G'day Keith,
I used Butyl Mastic ;)
Regards ACE  8)

FC427

Keith Wurth make a good sealant not messy like butyl mastic called Dab off.......FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

KFH

Thanks for all the suggestions.  I will check locally what is available and go from there.  The Worth seal sound good.

Keith
I was born with nothing and still have most of it left