News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

EH Brakes on FC stock front and rear ends

Started by CraigA, March 01, 2009, 06:30:38 PM

Previous topic - Next topic

DN2168

I have taken the diff from under the FC to be replaced with an EH one. The spring pads on the EH diff are about 10mm (3/8th) ;) wider. Are EH springs wider as well & if so I am guessing that I will need a set of them.
Or is there another option?

Thanks,
           Dean.

EffCee

Dean,

The EH springs are wider than the FC springs. The EH leaf springs will not fit in the FC.

Keith
Canberra, ACT

F4+ ;)

mcl1959

I think EH backing plates bolt onto the FC diff so there is no advantage in fitting the EH diff

Ken