News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FC Ute Seats

Started by Glenn 'Stinky' Stankevicius, March 31, 2011, 11:00:50 AM

Previous topic - Next topic

Glenn 'Stinky' Stankevicius

Can anyone tell me, original FC Ute seats,

1. Were they ever two-tone or just the single colour. Despite the apparent colour difference in the picture, looking at pieces that have been protected from the elements the vinyl appears to be the same colour on both sections ???

2. Were they all fitted with a rear "apron" that covered the gap between the seat and the rear window.



zulu


Stinky

Yes & yes, single colour with design as per pic with a flapper on the back, from memory the flapper / apron has a rod or a bow in it that then attaches to rear of the cab

Gary

Glenn 'Stinky' Stankevicius

Thanks Gary, the flapper with bow is intact, it's just weird how the top of the seat's colour has changed so dramatically to the lower section and exactly along the piping line across the seat  ???

EffCee

Stinky,

Maybe different dye lots in the material? one not as resistant to fading?

Keith
Canberra, ACT

F4+ ;)

collecta

This seat was also fitted with the nasco clear plastic seat cover,and is brittle compared to lower section. An FE i have also was fitted with these seat covers and the burgundy vinyl is black and burnt also on the upper sections front and rear, obviously got the most direct sunlight.
cheers
Scott
i collect old holdens coz they never die!