News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Car Wiring Kits

Started by Glenn 'Stinky' Stankevicius, August 02, 2010, 09:39:31 PM

Previous topic - Next topic

Glenn 'Stinky' Stankevicius

Does anyone know of any decent, well-priced car wiring kits?
There is a couple of simple ones in ebay at the moment [ebay]320569928679[/ebay] the only thing I don't like is that the fuse holder is not marked. I did use a kit from Airide to do my FE, but their current kit has too much "fruit" and is over budget ($200 tops  :-\)

FC427

Stinky I bought  the same one for my Rod was only $90 worked OK there is a diagram which shows fuse location for the various circits there was enough wire length to put plug sets just out side the firewall and for the rear wiring, a plug set in the A pillar.,  so some extra wire is required .......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

Glenn 'Stinky' Stankevicius

Cool, where did you get the $90 version from?

Glenn 'Stinky' Stankevicius

I bought the "cheap" $140 ebay one, compared to the $395 one I got for the FE a few years ago it is pitiful  :'(.
Proves the saying you get what you pay for  ::) should've known something was up when the seller wouldn't directly answer my question if all the required wires were there and just sent a diagram. The diagram of course shows all the car circuits and wiring, but you are only supplied with the wiring from the battery to the fuse block then out to the switches, anything beyond that you have source yourself  ??? . Lots of extra yellow wire for and circuits accessories though  :-\