News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Rear springs bolt

Started by Not Happy Jan, May 29, 2010, 02:06:44 PM

Previous topic - Next topic

Not Happy Jan

Hi All
Is the nut and bolt that goes through the middle of the leaf springs available from rares???
I got one off and the bolt is pretty well worn and the other the nut is just turning on the bolt :P
I picked up a new set of leaf spring inserts the other day but didn't see any bolt ???
Thanks Nick
You can never have too many!
Port Macquarie NSW

FCRB26

Yep they are available  its turning as there is like a big screwdriver slot on the inside easiest way if you are replacing is cut the nut off and hit it through with a pin punch.
https://www.americanautos.com.au/secure.html


FC427

Are you talking about the center bolts the ones that hold the spring pack together  ??? if so I get them from my trailer shop .......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

FCRB26

Yeah now i  have read it again id say thats the one they are after. :-\

Not Happy Jan

Thanks Boys.
Yes that's right ...I'm after the one that goes through the centre of the leafsprings.
the bolt sits proud of the top of the spring and sits in the hole in the middle of the rubbers for the spring pads and the nut end  fits into the other spring pad??
I'll try my local trailer manufacturer 8)
Nick
You can never have too many!
Port Macquarie NSW

zulu

It's not uncommon for these to be a little too long on the head & or the thread, just cut them to suit