News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Seat sides on e bay

Started by FCRB26, April 12, 2010, 06:22:57 PM

Previous topic - Next topic

FCRB26

Hi I recently purchased seat sides on e bay very dissapointed they are about the thickness of a 2 litre milk bottle extremely ordinary cutting out of the plastic

Just could not find anyone to make me some fibreglass ones.
Anyone else had this problem for 230 something dollars not real happy at all.



Also purchased accelerator pedal and dash barrel lights ect surround they were ok.

mcl1959

fchoon, I assume these are the Rare Spares ones (4 pieces plus screw set). If so, I would ask what the problem is with the thickness?  They are only marginally thinner than original but won't break like originals.

The fiberglass ones in Qld are a very poor job and far inferior to the plastic ones.

If the cutting of the excess plastic has gone too far, then return them to the supplier for another set.
If the cutting is not enough then you can easily trim some more material off until you are happy.

What about the shape and the finish - Is that OK?

Ken

FCRB26

there was nothing to say they were rare spares ones they came from melbourne yes they had too much cut off them in some spots and one of the top rear ones had a dodgey corner. I will be intrested to see if they crack in any way.

Glenn 'Stinky' Stankevicius

Take them back and point out the problem areas, I am sure Rares would rather fix the problem than have an unhappy customer spreading the word.

stapla

I brought some too. 

They are expensive for a few bits of plastic but once you fit them to the seat with the chrome trim they look fantastic.

Cheers
Peter

FX1975

I have a set of the rare spares ones, they are thinner than original though being more flexible I found this to be an advantage as they are less prone to breaking if someone sits on the edge of the seat which is what destroyed what was left of my originals in the first place.  I painted mine in acrylic to the same colour as the originals and put the stainless strips on and they look great.  If you are unhappy with the quality of the ones you received you should return or exchange for better ones
                         Cheers
                              Frank