News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Installing 308 into FC.

Started by morry, January 31, 2010, 05:26:55 PM

Previous topic - Next topic

What is the best rack and pinnion for the job, and also the best gear box tunnel?

Commodore
2 (66.7%)
Torana
1 (33.3%)
HQ
0 (0%)

Total Members Voted: 3

Print
Go Down Pages1
User actions

morry

January 31, 2010, 05:26:55 PM
Have removed my holden red from FC ute, still has HR disk brake underneath. Now wanting to install a 308 and turbo 400 which i have purchased. What is the best rack and pinnion for the job, and also the best gear box tunnel? regards, morry.

FCRB26

#1
January 31, 2010, 07:20:08 PM
I am sure there will be plenty of help on here
front mount rack is easiest rear is a bit harder you will have to notch the HR front end for clerance.
have a look through the site at the smick fe sedan and the ute (365days) that are doing V8 swaps.








(or you could put a nissan motor in it)

Fchoon

FC427

#2
January 31, 2010, 07:37:25 PM Last Edit: January 31, 2010, 08:33:06 PM by stinky
Hear is one of a SB  Chev in an FC
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

Spinner

#3
February 01, 2010, 12:15:23 AM
Like the Ford laser air filter. ;)
(0414) 49-6706.  d5461 on Ebay.
Print
Go Up Pages1
User actions