Can you use the HR diff housing and bolt it to the fe ute springs using the hr 4 bolt plate or do i have use the u bolts Thanking you Demon
Hi Demon,
You can mount the housing either way but if you are going to lower the car using lowering blocks you will need to use the U bolts.
Hope this helps
Steve
Hi Demon
The HR housing will fit with its original 4 bolt plates but a couple of things to remember are the HR diff has different uni joint,& the the flexable line for the brakes is a different thread but you can get a adaptor,& the hand brake cable is also different, (i used the HR one)
If you are going to run a HR disc front end make sure your HR diff has 9/16 wheel cylinders as they are different to the drum brake front.