I am after 2 FC Metal Fuse Holders, NOS or good second hand.
As I had a blown fuse & when dismantling the plastic insulator on the end broke up in to pieces.
Thanks for any help.
Cheers
John
John
These have been reproduced, not sure if available
Separately
Try Vintage Wiring Harness
Gary
John,
Bakelite insulator with a brass eyelet, and the eyelet has the wire soldered into it?
You're a dab hand with a lathe - machine one up out of Teflon.
I'll raid the store at work. It's amazing what's left over from the 1960s there.
Rob
Vintage wiring are in lock down. Don’t ask how I know.............
Sent from my iPad using Tapatalk
These are the best I can come up with
(https://i.postimg.cc/PvrQsFF0/4024-EA18-B43-A-4-E7-B-B559-C70-AA2007631.jpg) (https://postimg.cc/PvrQsFF0)
The rubber protector ends are hard to find in good order, but all inside is still good.
Ken
PM sent Ken.
John, started thinking, are you wanting the internals of the fuse or the heat shrink bits on the outside, two of mine shown have the heat shrink but it is very hard and would break easily.
Ken
Quote from: Maco on August 29, 2020, 08:44:46 AM
I am after 2 FC Metal Fuse Holders, NOS or good second hand.
As I had a blown fuse & when dismantling the plastic insulator on the end broke up in to pieces.
Thanks for any help.
Cheers
John
John have a few metal fuse holders you can have Mark
Hi Mark, all good thank you, I managed to get some.
Cheers
John