have seen a number of inner sill suppliers and varying prices, can anyone recommend a supplier or suppliers for these that would be great,I have a wagon
cheers
Corey
Stark automotive on Facebook, also sells on eBay.
They don’t have the mounting plates on them as it was too difficult to press them in. So he has made them as a separate part if you need them.
looked at stark and they look great and priced well.
This what I did for the front of mine
Sent from my CPH1725 using Tapatalk
Quote from: waynos on May 22, 2019, 08:35:39 PM
This what I did for the front of mine
Sent from my CPH1725 using Tapatalk
I can't see anything might be me
Ditto Corey wayno
Sent from my iPad using Tapatalk
sorry .dont know why no pic is there
i will try again
Nothing special. But easy to make. I made it out of 2mm for extra strength. Welded rhs on other side and will use pipe for crush tube. Sorry no pics of that yet(https://uploads.tapatalk-cdn.com/20190605/dbe7cbee70a7d93d9357664827fad284.jpg)(https://uploads.tapatalk-cdn.com/20190605/ae2afbd4fa8d411bf55a40710e5b924e.jpg)
Sent from my CPH1725 using Tapatalk
the stark ones are 180 bucks.they look good though
(https://uploads.tapatalk-cdn.com/20190605/5b51977c1366d73e1572fd9fae34f29e.jpg)
Made them up in one piece for my van. 1.6mm 18 gauge but no dimple pressings like you can get now. No crush tubes as I will use the factory style bolts with the step shoulder. I overlapped the front of the number one body member for a bit of extra bracing.
Sent from my iPhone using Tapatalk
Quote from: Errol62 on June 05, 2019, 08:31:08 PM
(https://uploads.tapatalk-cdn.com/20190605/5b51977c1366d73e1572fd9fae34f29e.jpg)
Made them up in one piece for my van. 1.6mm 18 gauge but no dimple pressings like you can get now. No crush tubes as I will use the factory style bolts with the step shoulder. I overlapped the front of the number one body member for a bit of extra bracing.
Sent from my iPhone using Tapatalk
Quote from: Errol62 on June 05, 2019, 08:31:08 PM
(https://uploads.tapatalk-cdn.com/20190605/5b51977c1366d73e1572fd9fae34f29e.jpg)
Made them up in one piece for my van. 1.6mm 18 gauge but no dimple pressings like you can get now. No crush tubes as I will use the factory style bolts with the step shoulder. I overlapped the front of the number one body member for a bit of extra bracing.
Sent from my iPhone using Tapatalk
all you needfor the dimples is some round bar and a bit of pipe.smash the round bar into the pipe .it will give a similar look .....or press it if ya got one.
maybe i need to do a how to for the backyard hacks............
Yes please, that’s me alright. Suppose I still could. They’re on the car but the outers aren’t yet.
Sent from my iPad using Tapatalk
i have an idea for you to do it on the car errol.....involves a porter power.do you have one?
Appreciate your offer though I don’t have one Wayno. I suppose I could make up a wee press and use a small 1.5 tonne jack or maybe I’ll buy a portapower? 18# zinc anneal, I don’t know. Birthday coming up. Another car is taking precedence, ute with good sills but rusty rear floor around the tank.
Anyway tell us of your progress mate. Mine are FB and EK so not appropriate on here.
Sent from my iPhone using Tapatalk