Are there any other Holdens that have door pulls similar to an FC?
I have some and they're are two different types. All are " a Linlok product" (Linlok I know is still a big manufacture of all sorts of door hardware), one has 20 stamped under it the others don't.
the 20 one is smaller and has finer ribs on it.
the other two are slightly larger and have larger ribs.
TIA
I think they were used on just about anything while in production, including FC Holden doors.
I have the same Lenlok 20 handles on my sedan. I had a pair to start with & I recall coming across the other (later?) version searching for more.
(http://i.imgur.com/74LtiDa.jpg)
Some of the current Lenlok handles also look familiar.
(http://i.imgur.com/3OjVJmQ.jpg)
The finer lined Lenlok handles look good on an FC because they match the handles. The genuine NASCO handles look a bit "cupboard like" in my opinion.
(https://s4.postimg.org/57tlgla1l/image.jpg) (https://postimg.org/image/57tlgla1l/)
Ken
Not goin for the kitchen cupboard look either Ken, I agree ! lol
here is what is in my ute - the coarser type, haven't had them off yet so don't know if there is any different marks underneath.
(http://i1270.photobucket.com/albums/jj618/Roybeth1/DSCN6579_1.jpg) (http://s1270.photobucket.com/user/Roybeth1/media/DSCN6579_1.jpg.html)
here are the extra ones, have two of the coarser ones, only one of the Lenlok 20 :-(. They do go better with the other door handles so will have to keep my eye out for another one, looks like the screw holes should still line up.
(http://i1270.photobucket.com/albums/jj618/Roybeth1/DSCN6575_1.jpg) (http://s1270.photobucket.com/user/Roybeth1/media/DSCN6575_1.jpg.html)
mcl1959
if you want to sell the cupboard door pulls I am interested as i have a Fb with the holes in doors to suit, but the handles I have are to badly pitted to re chrome and doors are already painted LET ME KNOW one way or the other
BILLY B
Billy, the NASCO door pulls are for sale, they are in this years FE FC annual auction. See advertised in events.
Regards. Ken
Those Lenlok 20s look coowell ! Never seen them before. Yair the cupboard handles are daggy. Plenty of them around. Genuine Nasco notwithstanding.
Sent from my iPad using Tapatalk
Cant see it I down loaded excel viewer but still no luck HELP! ::) ::)
BILLY B
(http://i.imgur.com/zHg57Qr.jpg)
Thank's DJ
Now how do I go about bidding on them I am in Newcastle N.S.W.
BILLY B
p.m sent Billy B
ACE 8)
Pm replyed
For everyone's benefit.
If you are unable to attend the auction, or do not have a friend who can attend on your behalf, we offer a proxy bidding service.
Bids can be sent to me by pm or email and these will be kept confidential.
I will bid on your behalf.
Ken
Could someone do me a favour please and measure the distance between the mounting screw centres for the two types of Lenlok handles (fine lines, and coarse lines)?
My EK wagon has been painted, and nearing completion. I have holes in the two front doors for pull handles, and like the look of the Lenlok handles (especially the fine line ones). The holes in my wagon are 3 15/16" apart (nearly 4"). Assuming the Lenloks fit, I'll start hunting for a pair (it would be just my luck to buy them, only to find they don't match the holes).
Cheers,
Harv
I only have the Lenlok 20 model with fine lines. Centre to centre looks too wide for your existing holes.
(http://i.imgur.com/xJ6L9ech.jpg)
But, the base that sits on the door seems plenty wide enough to cover them.
Inside/outside dimensions .....
(http://i.imgur.com/wri8z8Nh.jpg)
I had a similar situation - used one existing hole & drilled a new hole in each door. I left the old hole & added a curved gal plate inside the door to anchor to & spread the load.
Thanks DJ - very much appreciated.
I'll put a Parts Wanted ad up.
Cheers,
Harv
2 of these Lenlok 20 handles posted on eBay.
https://www.ebay.com.au/itm/FE-FC-HOLDEN-DOOR-PULL-TO-HANDLES-1-PAIR-ONLY/292316304447?hash=item440f68d43f:g:cMkAAOSwehZZ~Fdo
Thanks DJ. I managed to get hold of a pair of handles from a gentlemen, and have fitted them to the EK. They look really good against the ribbed winders/door handles.
Cheers,
Harv
Thanks DJ. Might put a bid on but a bit frightened by the opening bid.
Sent from my iPad using Tapatalk
I think I paid $40 for a pair years ago. It was right up there at the time but they were in good nick & I wanted to match the two I had for my sedan. Aus Post charges have risen a lot too which doesn't help.
👍good info DJ
Sent from my iPad using Tapatalk