News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

LH torana rack and pinion

Started by Liam Moloney, June 25, 2002, 07:25:51 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Liam Moloney

June 25, 2002, 07:25:51 AM
Hi
I have a LH torana rack and pinion steering rack and im wondering what is involved in converting to rear mounted rack and pinion. Ive been told that the shafts are the right length but how do i go about converting my steering shaft and how do i secure it to my crossmember. What else is involved
Thanx Liam

mcl1959

#1
June 25, 2002, 10:57:51 AM
This is not a job for the ametuer as proper steering priciples MUST be maintained in order to keep the steering geometry correct.  Unless you understand Bump steer and the Ackerman principle, I suggest you buy a kit from someone such as Rod Hadfield or the like.

Ken
Print
Go Up Pages1
User actions