News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Hand Brake handle removal

Started by graham_fuller, March 19, 2005, 04:00:13 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

graham_fuller

March 19, 2005, 04:00:13 AM
Will the hand brake handle come off just by drilling out the pin?Where do I get a replacement pin from?
Cheers,
Graham

ACE

#1
March 19, 2005, 06:29:12 AM
Hi Graham,
I've drilled the pins out  and pressed a nail in and carefully cut off the excess.
Hope this helps,
Regards ACE  8)

mcl1959

#2
March 19, 2005, 07:51:15 AM
If you have a few old ones you destroy a handle off a donor and punch the pin out.  Then drill out the pin on your good one.

Ken
Print
Go Up Pages1
User actions