News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Clean Screen washer bottle

Started by FE_UTE, March 12, 2002, 01:41:55 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

FE_UTE

March 12, 2002, 01:41:55 PM
I have a bottle with a black lid in a frame,a vacuum pump and a brass part that screws into the pump with a mesh filter on the end.
Can someone tell me how to fit the bottle and if any parts are missing
Gary

FE_225

#1
March 12, 2002, 02:23:26 PM
Hi Gary
You'll also need the pushrod that goes into the wiper knob to operate it, the water jets that fit into the bases of the wiper arms, hose and a few tees.
I have a copy of the fitting instructions and hose layout and connections if you need it. Let me know if you do and I'll send it thru.

Cheers
Tony
Worried about fuel economy?....Then buy a push bike!

FE_UTE

#2
March 13, 2002, 05:05:43 AM
Hi Tony
Thanks for the info ,I am going to email the bloke I got the bottle from to see if he has these extra items
I would be most grateful If you could email me the fitting instructions and hose layout and connections
Thanks again
Gary
Print
Go Up Pages1
User actions