News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Electric wipers

Started by graham_fuller, January 25, 2005, 09:11:56 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

graham_fuller

January 25, 2005, 09:11:56 PM
My electric wiper motor is from an EK and the blades continually overshoot the windscreen,causing the stainless trim around the windscreen to where out.When I installed them I shortened the secondary arm on the wiper motor as the EK's windscreen is wider.What does everyone else do when fitting electric wipers?
Cheers,
Graham

Spinner

#1
January 26, 2005, 02:01:04 AM
Use the EK arms as built- no mods apart from fitting them to the FE after lubricating all pivots.

Spinner
(0414) 49-6706.  d5461 on Ebay.
Print
Go Up Pages1
User actions