News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Which Diff

Started by Glenn 'Stinky' Stankevicius, January 02, 2002, 08:36:52 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Glenn 'Stinky' Stankevicius

January 02, 2002, 08:36:52 AM
I was measuring up the 14x6 Tasmans that I purchased to go under the FE. By my measurements the diff (drum to drum) is 1440mm. To centre the rims in the wheel well they need to come in about 25-30mm (1 inch) each side. Is there a holden diff (banjos are OK) that is around 1380-1390mm wide?

air-chief

#1
January 10, 2002, 01:57:15 PM
Maybe try a banjo diff out if an LC/LJ. I know that these diffs are shorter than FE to HR, but how much shorter I don't know.
This might be your best shot. Let me know how it goes.

Air-chief.

dean tenabel

#2
February 27, 2002, 01:01:22 AM
i have an LJ diff in my FC Van and they are 1" shorter each side ;)
Print
Go Up Pages1
User actions