News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

torana diff

Started by nicko, June 02, 2004, 08:39:33 AM

Previous topic - Next topic

nicko

HI can anyone tell me if an LH Torana diff is longer ,shorter or the same length as an FC diff?

fcvan

Hey Nicko,
  I don't know the exact diff length but I do have the wheel track measurements.  FC is 1410mm and LH is 1430mm.  I don't know what width wheels/ offsets the LH runs but you would think the diff lengths would be fairly close. Hope this helps a little but I'm sure everyone else will add some more exact info.

miikael

mcl1959

I think the LH diff is the same as FC, if you want a narrower diff then the LC or LJ diff is the one to get as this is about 2 inches shorter

Ken

nicko

thanks ,i will get rid of it and chase up an LJ as i want a couple of inches more clearance on ute for the Western deep dish kidney's

Burnsy

I have just found a LH diff for my car (EK) can anyone tell me what is involved in putting it in, is it a simple bolt up using the torana plates and u bolts or do I need to weld mounts on or something?

Cheers,
Mike
Mike

ACE

Hi Burnsy,
You'll have to cut off all the Torana coil spring  mounts and weld mounting plates on to accept the EK leaf springs. ;)
Hope this Helps,
Regards ACE 8)

Burnsy

Can anyone give me any advice on setting up the handbrake using the Torana diff and drums.
Mike