News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Front Discs

Started by brett, April 23, 2001, 12:00:00 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

brett

April 23, 2001, 12:00:00 PM
When a front end is modified to fit an EH, can it then be re-modified to fit an FC, or does making it fit an EH make it unsuitable for FC?
If you want more inches stroke it!

Richard

#1
April 24, 2001, 12:00:00 PM
Presuming the modification you refer to is removing the HR outrigger and replacing it with an EJ/EH one, then the front end will be perfect for an FE/FC, without any further mods.  See the article on our website on fitting a HR front end to an FE or FC, at http://www.fefcholden.org.au/techinfo/tech002.html
 cheers RET

brett

#2
April 25, 2001, 12:00:00 PM
Thanks a Heap Richard! I'm now able to seriously look into finally getting around to upgrading to a HR front end and putting the disc brakes on, so this info comes in very handy. Cheers.
If you want more inches stroke it!
Print
Go Up Pages1
User actions