News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Replacement of Lower Steering Box Seal

Started by Rod, March 02, 2001, 01:00:00 PM

Previous topic - Next topic

Rod

Has anyone out there replaced the lower steering box seal and if so how did you go about it? From what I have read in the manual it maybe possible to disconnect the pitman arm and remove the sector shaft from out the top of the box. Any suggestions on replacing the seal without removing the steering from the car would be much appreciated.
 Rod

Ken McLean

As the manual suggests, u must remove the pitman arm and steering shaft to replace the seal.  But u can do this with the steering column still in the car.
 Ken